HomeIndustry news 650V SiC Schottkys Handle up to 10A

650V SiC Schottkys Handle up to 10A

February 2, 2015 By admin Comments are Off , , , ,

Cree, Inc. has expanded the industry’s most extensive SiC Schottky diode portfolio with the addition of four new 650V diodes. Developed in response to the power supply industry’s recent demand for components with a nominal voltage rating slightly higher than 600V, the new 650V Cree® Z-Rec® SiC Schottky diodes enable high efficiency power systems with improved reliability, simplicity, and total cost.

Recommended: 12V Li-ions for Deep-Cycling Back-up Power Applications

Beneficial characteristics of the new diodes include: zero reverse recovery current, high frequency operation with low EMI, temperature-independent switching behavior, reduced heat sink requirements, and significantly higher surge and avalanche capabilities. They also exhibit higher efficiency than comparable silicon diodes, with essentially no switching losses, and a positive temperature coefficient on VF enables parallel devices without thermal runaway.

Designed to satisfy power systems engineers’ need for higher current in a more compact, surface mount package, the new 650V 6A C3D06065E, 8A C3D08065E, and 10A C3D10065E Cree Z-Rec diodes are supplied in TO-252-2 (DPAK) packages with a smaller footprint than many of the comparable diodes currently on the market. Exhibiting both zero recovery voltage and extremely fast switching, these new 650V devices enable right sizing of the diode, optimizing both cost and performance in switch mode power supplies, power factor correction, and motor drives, among other applications. They may also negate the need for thru-hole SiC Schottky diode assembly, as well as enable smaller final assembly dimensions for new 650V designs.

Related: Faster and Easier Firmware Development for 8- and 16-bit PIC MCUs

Additionally, these three diodes are automotive qualified to AEC-Q101, and are ideal for use in the power factor correction and onboard power electronic conversion systems (e.g., chargers, dc-dc converters, inverters, etc.) of hybrid and electric vehicles. Unlike competitors, whose automotive qualified diodes are typically separate part numbers sold at higher costs, approximately 90% of Cree’s C3D Schottky diode portfolio is, and always has been, automotive qualified at no extra cost.

The fourth new 650V diode, Cree’s 6A, 650V C3D06065I internally isolated Z-Rec Schottky diode is an alternative to full-pack diodes and a complement to the existing and extremely successful 8A C3D08065I and 10A C3D10065I. Featuring a TO-220 package with internal ceramic insulation – unique to Cree with regard to SiC Schottky diodes – that provides 2.5kV isolation, Cree’s new 6A, 650V internally isolated diode also provides greater operating ranges and capabilities than comparable full-pack devices, including significantly higher maximum temperatures and greater power dissipation. Additionally, by eliminating the need to insert an external isolating sheet between the diode and heat sink, this new diode eases design, reduces cost, and supports the efficient manufacturing of HVAC, PFC, and switch mode power supplies.

source: http://www.powerpulse.net/story.php?storyID=31501

Comments are closed.