HomeIndustry news Six-Output Programmable PMICs for Consumer and Industrial Uses

Six-Output Programmable PMICs for Consumer and Industrial Uses

March 18, 2015 By admin Comments are Off , , , ,

Micrel Inc. today introduced the MIC7400/MIC7401, a new family of highly integrated and configurable power-management IC (PMIC) solutions featuring six independent dc-dc regulators. Available in a small 4.5mm x 4.5mm FQFN package, this product family provides one of the industry’s highest power density solutions with total solution size of 12mm x 8mm x 1mm. The MIC7400/MIC7401 combine a total of five independent 3A synchronous buck converters, an independent 200mA non-synchronous boost converter, and numerous programmable features, providing a highly flexible power solution. The device is targeted at SSDs and a growing number of applications deploying processors and SOCs, including smart-home and internet-of-things (IoT) devices. The devices are available in volume quantities with 10,000 quantity pricing starting at $4.09.

Recommended: TI and EPC Partner on 80-V Half-Bridge GaN FET Module

“End product design requirements continue to change with power requirements varying during product development while there is constant pressure on product designers to reduce board space,” noted Brian Hedayati, vice president of marketing for high performance linear and power solutions at Micrel. “Micrel’s configurable PMIC provides a flexible solution that allows instantaneous adjustments for requirement changes thereby reducing design cycle time and time to market. The MIC7400/MIC7401 power architecture allows designers to enhance system efficiency across a range of power modes.”

The devices are configurable via an I2C interface and an internal EEPROM. These highly configurable power management devices offer dynamic output voltage scaling, normal and standby modes, and start-up power sequencing order and delays. Utilizing only 200 microamperes of quiescent current in normal mode, the MIC7400/MIC7401 also has a low power standby mode of operation that provides flexibility to reduce the quiescent current by decreasing output voltage or completely turning off any individual output. This feature further optimizes efficiency in sleep/hibernate states and prolongs operating life in sensitive lower power applications. The combination of power density and feature flexibility, in addition to superior fast transient response and light load performance, results in an efficiency-optimized high-density solution for space constrained applications while reducing design cycle time.

Related: 30A Digital PowerSoC for FPGA-based Systems

The device is accompanied by a simple and intuitive graphical user interface (GUI) tool to aid in the configuration and monitoring. The MIC7400/MIC7401 operates from a 2.4V to 5.5V input and can provide an output of 0.8V to 3.3V for the buck regulators with 1.5 percent output accuracy over line/load and temperature. The integrated boost regulator is capable of regulating output voltages from 7V to 14V. Other configurable features include soft-start rise/fall times, current limit, output active discharge in-addition to the threshold and delay for the integrated power-on-reset circuitry. The MIC7400 and MIC7401 are specified with a junction temperature range of -40 to +125 degrees C.

source: http://www.powerpulse.net/story.php?storyID=31809

Comments are closed.