XP Power‘s ASB110 series provides a complete ac-dc power supply module requiring no external components. The full-brick-sized power supplies offer very high efficiency and a low profile for PCB pin mounted designs. Aimed at ITE and industrial customers looking for a base plate cooled power supply solution, the ASB110 provides 110W of dc output power from a universal ac input.
Murata has announced the latest addition to the OKLP range of “Power Block” products from Murata Power Solutions. In addition to the 25A and 35A, Murata now offers the OKLP-X/60-W12A-C, a 60A Power Block solution. This Power Block concept sits between a discrete Point-of-Load (PoL) design and that of a complete non-isolated buck converter module. The Power Block is essentially
Stackpole Electronics, Inc. has extended the MLF and MLFM Series to include the smaller 0102 size. This part is approximately the size of an 0805 chip resistor and is rated up to 1/5 watt. Tolerances for this series range from ±5% down to ±0.1% and TCR’s range from ±100 ppm down to ±10 ppm, making the MLF and MLFM useful
Texas Instruments, Inc. (TI) today introduced a four-channel buck dc-dc converter with PMBus/I²C digital interface for applications in space-constrained equipment that experience high ambient operating temperature without cooling, such as small cell base stations, infotainment and solid state devices. The TPS65400 dual- or quad-output configurable dc-dc converter integrates eight power MOSFETs and features efficiency at up to 95-percent in a
Linear Technology Corporationannounces the LTC3887, a dual output synchronous step-down dc-dc controller with I²C-based PMBus interface for digital power system management. The LTC3887 differs from the previously released LTC3880 with an enhanced feature set that includes a faster 70ms power-up time, higher output voltage capability and a fast ADC mode that provides an 8ms update rate for one parameter. In
ProTek Devices today introduced a new series of ultra-low capacitance transient voltage suppressor arrays (TVS arrays) for overvoltage circuit protection in applications that include smartphones, Ethernet, USB, sensor nodes, and more. The series consists of five components with rated stand-off voltages between 5-24 Volts. The components are also packaged in a low-profile miniature DFN-2 package. Recommended: High-Voltage 16-Cell Li-ion Monitoring
Battery applications designers are tasked with meeting increasingly stringent safety standards for ultra-thin notebooks and other portable consumer electronics powered by high-capacity lithium polymer and prismatic cells. In response, TE Connectivity’s business unit, TE Circuit Protection, introduces the new MHP-TAM series. The MHP-TAM device features an ultra-low-profile (L: 5.8mm x W: 3.85mm x H: 1.15mm max.) package and a high
Lapis Semiconductor, a ROHM Group company, has announced the development of a lithium-ion battery monitoring LSI that supports up to 16 cells in series, significantly reducing the size of lithium-ion battery monitoring systems (for example in energy storage systems). The ML5239 facilitates multi-cell monitoring and allows for multi-stage series connection to support higher-voltage lithium-ion battery monitoring systems requiring more than
TDK Corporation has announced the EPCOS TSM-LC-N690 thyristor module for power factor correction (PFC) with an expanded operating voltage range up to 690Vac. The module performs two-phase switching of the capacitors, so that a neutral conductor is not needed. Depending on the operating voltage, the new module is designed for a reactive power of 40 kvar to 75 kvar and
TE Connectivity announces the launch of its BCF series power line filter with threaded stud terminals. Previously offered only in terminal block terminations, the new low-weight BCF series is a 3-phase Delta EMI Filter with threaded terminals for cables with ring terminals. The new 3-phase filters are used to reduce noise emissions typically associated with variable speed motors like those