Semiconductor Circuits, Inc. expands the power rating of the “Cool Power Technologies” wide input range 16th brick dc-dc converter series. These open-frame modules provide up to 100W of output power with output voltages of 2.5-, 3.3-, 5.0-, and 12-Vdc – suited for distributed power architecture applications or as a fully-regulated intermediate bus converter. These modules are compliant with DOSA 16th brick footprint and interface standards. These converters have an input voltage range of 18- to 36-Vdc or 36- to 75-Vdc and provide 2250Vdc input-to-output isolation.
Recommended: SIP PoLs available in 20 30 and 50 Amp Models
The CPT 2:1 input series meets EN 60950 basic insulation requirements and is UL94 V-0 flammability rated. The module complies with all of the typical industry requirements including no load operation, 2X nominal input voltage transient and pre-biased load startup.
The modules feature a standard 16th brick pinout with dimensions of 1.3” L x 0.9” W (33.02mm x 22.86mm.) They have a maximum height of 0.404″ (10.3mm) which accommodates tight card spacing with minimal airflow blockage of downstream components.
source: http://www.powerpulse.net/story.php?storyID=32668
Comments are closed.
