Discharge Current Calibration
Step1. Select the right device and right channel under “device list”
Step2. Select the DC-Seg1 to calibrate Discharge current.
Step3. Click “Run”, the machine will be calibrated at the first measuring point.
Step4. Use a multimeter(here we use FLUKE 187) to measure the current, input the measure current after “Multimeter Value”.
Step5. Click “Input”.
Step6. Again click “Run”, the machine will be calibrated at the second measuring point.
Step7. Again input the multimeter readout after “Multimeter Value”.
Step8. Click “input”
Comments are closed.
