admin

BTSDA is a free software from neware, short for Battery Testing Systems Data Analyzer, it’s a software to cope with NDA files. BTSDA provides brilliant data and curves rendering, and also some other functions like curve comparing, data filtering.  In this article, let’s talk about the basic operations of BTSDA. 1) When you click any NDA format file or click View

Read more

Calibration, in general use, is often regarded as including the process of adjusting or aligning the output of or indication on the equipment to agree with value of the applied standard, within a specified accuracy.  Neware battery testing system generally output and measure current and voltage, and it has different circuits for charge and discharge. So we need to calibrate

Read more

Calibration may be called for:  1. After equipment has been repaired or modified.  2. When a specified time period has elapsed.  3. When a specified usage (operating hours) has elapse.  4. Before and/or after a critical measurement.  5. After an event, for example:  a)After the equipment has had a shock, vibration, or has been exposed to an adverse condition which

Read more

Below maintenance suggestions are listed for your better using of the equipment. o To achieve the best performance and testing accuracy, your equipment is suggested to be calibrated annually. o The surrounding space must be clean, with proper temperature and humidity to avoid influence on the equipment accuracy, damage to the inner circuit or even safety issues. o Also do

Read more

BTS Client is a traditional Windows program, it has below 6 main content blocks, and the following screen shot you see is the default BTS Client window you’ll see when you launch it. Here is the explanation of the 6 blocks in the BTS Client main-form: 1. Device list: Devices and their connection status. Device management – Information inquiry, embedded software

Read more

1. Battery should be correctly connected to the channel output clamps with good contact. Improper connection will result in battery damage or some other loss. 2. A battery with its voltage higher than the voltage range of the equipment you are connecting to is not permitted. This will damage the equipment. 3. If the equipment has a voltage output range

Read more

There are several things you need to pay attention to when you are tying to plug in Neware’s battery testing equipment. 1. You can only plug the equipment to a power supply within the voltage range which indicated on the equipment information label. 2. Pay also attention the wire polarity and the maximum power requirement. Improperly electricity connection may result

Read more

If the equipment is stand by for a long time, there may be need some extra electric power to charge the capacitor of the inner power supply in the equipment, producing a transient large power requirement. This power may let the air-break switch to cut off the circuit, just re-turn on, maybe need some more times. It’s called the ‘Short

Read more

Generally, Neware BTS consists of following components:  o  Neware tester, including embedded or external middle machine, auxiliary channel cabinet. o  Power plugs. o  Battery clamps. o  Communication cables. Switches may be included if multi testers purchased. o  CDROM. Including software, tools, patches and user manual. o  Computer, Monitor or UPS (if purchased).

Below series are our major products. They are just briefly introduced here. To know more, please contact with our us via onliechat, phone call or email. Year 2006, BTS3000 Introduced to the market in 2006, the most cost-competitive cell and battery test equipment, BTS3000 is now the most popular type in the battery testing field, and it serves for research institutes,

Read more