BTS9000 and BTS3000n software tips

The DCIR function in BTS9(BTS9000 machine) is pretty easy to use. Accroding to the IEC standard, we should use 2 discharge steps together then to get the DCIR values: 0.2C discharge for 10s, and then 1C discharge for 1s. This is how to use this function in BTS9 software. Choose ‘measure resistance’ step from the drop down list, then double

Read more

The sampling frequency of Neware battery tester series can be up to 100Hz or even 1000Hz, which means a huge amount of data could be retrieved in a very short time, this is helpful when customers want to use Neware testers for high C-rate or pulse test. While, for long time cycle life tests, this high-speed sampling frequency might bring

Read more

分成以下几个部分： BTS3000n简介 BTS3000n硬件连接 BTS3000n软件安装 在软件中找到设备 BTS3000n软件使用

分成以下几个部分： BTS9000简介 BTS9000硬件连接 BTS9000软件安装 在软件中找到设备 BTS9000软件使用

设置为容量的0.01或者0.05即可，比如电池容量是2000mAh的*0.01=20mA或2000mAh的*0.05=10mA。

BTS9脉冲测试中，正值表示充电，负值表示放电，但是在同一个脉冲工步中，充放电不能同时出现。另外，在脉冲是不能切换量程的，默认按照输入的最大值确定量程并运行。