Microchip Technology Inc. announced its latest Digitally Enhanced Power Analog (DEPA) controllers—the MCP19118 and MCP19119 (MCP19118/9). They provide simple yet effective analog pwm control for dc-dc synchronous buck converters up to 40V, with the configurability of a digital MCU. And they are the industry’s first devices to combine 40V operation and PMBus™ communication interfaces. These features enable quick power-conversion circuit development with an analog control loop that is programmable in the integrated 8-bit PIC® MCU core’s firmware. This integration and flexibility is suited for power-conversion applications, such as battery-charging, LED-driving, USB Power Delivery, point-of-load and automotive power supplies.
Recommended: Digital Power Consortium formed by CUI, Ericsson and Murata
Along with the rapidly growing popularity of digitally-controlled power supplies, due to their configurability for a variety of operating conditions and topologies, power system designers also have an increasing need for the ability to report telemetry and conduct two-way communication (typically for monitoring and fault reporting), via standard communication interfaces such as PMBus. Additionally, the recently released USB charging specifications (USB Power Delivery and the USB type C connector) include variable charging voltages, which allow for rapid device charging, but add potentially difficult hardware requirements.
Related: 24-V, Sinusoidal, Sensorless BLDC Motor Drive
Additionally, the integrated MCU core can be used to monitor other parts of the application to sequence startup operations; intelligently manage faults, under-voltage or brown-out conditions; perform housekeeping functions; adjust power outputs in response to load requirements (such as battery charging or USB port power); and assisting with the module’s external interfaces (monitoring or delivering signals to the user or system). With integrated linear regulators, pwm generators, ADCs, MOSFET drivers, analog error amplifiers and control-loop compensation, the MCP19118/9 devices provide a very compact circuit solution.
Properly implemented, this system is capable of high conversion efficiency and excellent transient response for reduced system power losses, smaller heatsinks and longer battery life in portable applications. These DEPA devices can also provide data over the I2C™ interface, using customized SMBus or PMBus compatible commands.
Opinion: Designing Simple but High Performance Chargers
“This is another example of the award-winning innovation found in Microchip’s digitally enhanced power analog product family,” said Bryan J. Liddiard, marketing vice president of Microchip’s Analog and Interface Products Division. “No other semiconductor company offers this level of flexibility and configurability in its dc-dc controllers, and no other product solution provides this level of functionality for power-conversion, battery-charging or LED-drive applications.”
MCP19118/9 programming assistance is available via the MCP19111 Design Analyzer and the MCP19111 Graphical User Interface Plug-in for MPLAB® X IDE. Both of these software tools are available today, via a free download from the “Documentation & Software” section of the above links. Additionally, Application Note AN1541 describes how to use these tools. Microchip’s full suite of standard development tools also support these MCP19118/9 DEPA controllers, including the MPLAB X Integrated Development Environment (IDE), PICkit™ 3 (part # PG164130), PICkit Serial Analyzer (part #DV164122), and the MPLAB XC8 Compiler.
The MCP19118 and MCP19119 are both available now for sampling and volume production, with prices starting at $2.92 each in 5,000-unit quantities. The MCP19118 is offered in a 4×4 mm, 24-pin QFN package, while the MCP19119 is available in a 5×5 mm, 28-pin QFN package.
source: http://www.powerpulse.net/story.php?storyID=30945
Comments are closed.
