Tag: battery industry

14
Jul

Ultrafast FREDs target Automotive and Telecom Systems

Vishay Intertechnology, Inc. today introduced four new 1A and 2A FRED Pt® Ultrafast recovery rectifiers in the compact low-profile SMF (DO-219AB) eSMP® series package. Combining extremely fast and soft recovery characteristics with low leakage current and low forward voltage drop, the AEC-Q101-qualified devices reduce switching losses and power dissipation in automotive and telecom applications. Recommended: Automotive High-Side Drivers for Use

Read more

14
Jul

Quad-Channel Protector with Programmable Fault Detection

Analog Devices, Inc. has introduced a quad-channel protector and two multiplexers offering +/-55-V overvoltage protection (OVP) for precision converters, amplifiers and other components that operate from a low voltage of 4.5V up to 36V. The ADG5462F quad channel protector, ADG5248F 8:1 multiplexer and ADG5249F differential 4:1 multiplexer offer +/-55-V OVP in power-on and power-off stages and provide robust, precision protection

Read more

14
Jul

Medium-Power Transistors with Solderable Side Pads

NXP Semiconductors has introduced their first medium-power general-purpose transistors with solderable sidepads in DFN2020D-3 (SOT1061D). The 23 new types with Vceo values of 20-80 V offer a collector current of 1-2 A on just a 2×2 mm small footprint. All types are AEC-Q101 qualified and come with an exposed heat sink for excellent thermal and electrical performance. They are also

Read more

10
Jul

Polymer Ta Chip Caps to 470 µF and ESR to 25 mΩ

Vishay Intertechnology, Inc. has enhanced its T55 series of vPolyTan™ surface-mount polymer tantalum molded chip capacitors with eight new ratings in the A, B, and T (low-profile B – 1.2 mm max.) case sizes. Taking advantage of Vishay’s package technology and recent investments in polymer tantalum technology, the Vishay Polytech T55 series now offers significantly higher capacitance and lower ESR

Read more

10
Jul

Super-Fast Switching Diodes Deliver Ultra-Low Leakage

Aimed at designers who require ultra-low leakage and super-fast switching speeds, the DLLFSD01x switching diodes introduced by Diodes Incorporatedtarget LCD displays, portable electronics and numerous computer and consumer products. These devices are particularly applicable to systems that require high power efficiency and low switching loss. Recommended: DC-DCs with 0.5microA Quiescent Current target Wearables The DLLFSD01x series of switching diodes features

Read more

10
Jul

DC-DCs with 0.5microA Quiescent Current target Wearables

Torex Semiconductor Ltd. has developed theXCL210 series, a new product in their lineup of step-down “micro dc-dc” converters with an integrated control IC and coil. The XCL210 series is designed for applications that require a low quiescent current such as wearable devices, healthcare devices, Bluetooth Low Energy devices, and energy harvesting. Recommended: Dual-channel 4.5A /16mΩ Integrated Power Switch “In recent

Read more

10
Jul

Sensor Interface Connects Multiple Sensors to MCUs or FPGAs

Exar Corporation introduces a highly-integrated sensor interface analog front end (AFE) that provides calibration of sensor outputs. The XR10910 offers an onboard 16:1 differential multiplexer, offset correction DAC, programmable gain instrumentation amplifier and voltage reference. This AFE provides 14-bit signal path linearity and is designed to connect multiple bridge sensors to an MCU or FPGA with an embedded ADC. The

Read more

10
Jul

IP67 Waterproof Mixed Density Combo-D Connector

The industry appetite for waterproof and ingress protection features is increasing. In keeping with this trend, Positronic has produced the WCBD Series, a waterproof version of the popular Combo-D mixed power/signal connector family. The WCBD has the ability to mix power and signal in a single connector body capable of up to 40 Amps per size 8 contact. Rated mechanical

Read more

10
Jul

Regenerative AC Load Bank Reduces Energy Costs by 90%

Intepro Systems announces the introduction of the PEL Regenerative AC Electronic Load Bank. Built around a 60 kVA chassis, the system can be paralleled for higher power requirements. It also accepts standard AC input ranges from 120 to 480V and provides grid-synchronized, regenerated ac power output that returns 90% of the equipment under test (EUT) load power back to the

Read more

10
Jul

500W 3U DC Power Converters with AC or DC Inputs

Schaefer, Inc. announces the C/B 600 Series of dc-dc and ac-dc converter modules and battery charger (B600 models). The highly-reliable, compact and rugged 3U design uses industrial-grade components and provides a high-density, space saving solution for applications in industries such utility, oil/gas, automation, heavy industrial, military, telecom/datacom, alternative energy, transit/railway, process control, and power stations. Recommended: Emerson to Spin off

Read more