Tag: battery industry

Artesyn Embedded Technologies today announced the new 360-W high-efficiency LPS360-M series of ac-dc power supplies with medical and IT equipment safety approvals. The new open frame power supply series is in the industry standard 3 x 5 inch (76.2 x 127 mm) footprint and just 1.37 inches (34.83 mm) high. Recommended: Dual 3A/Single 6A Step-Down Power Modules Shrinking The LPS360-M

Read more

L-com Global Connectivity have added a series of Cat6, Cat5e and Cat5 PoE Injectors with 56VDC power supplies to address applications where power and data are required to connect end devices over long distances. The 56Vdc power supplies shipped with the injectors can be used for 48Vdc PoE applications that involve long cable runs. The 56Vdc power output compensates for

Read more

Ambiq Micro, Inc. announced the Apollo family of four 32-bit ARM® Cortex-M4F microcontrollers (MCUs). In real-world applications, their energy consumption is typically 5- to 10-times lower than that of MCUs of comparable performance, resulting in far longer battery life in wearable electronics and other battery-powered applications. The dramatic reduction in energy consumption is achieved using Ambiq’s patented Subthreshold Power Optimized

Read more

AVX Corporation has introduced its smallest and lowest-profile tantalum capacitor: the new sub-millimeter 0201 TACmicrochip®. Measuring only 0.6mm x 0.35mm x 0.35mm, the new 0201 E case TACmicrochip Series SMD tantalum capacitors deliver high CV (0.47µF / 6.3V) and low leakage (0.01CV) in an extremely small package, as well as exhibit all of the standard benefits of tantalum technology, including:

Read more

Vishay Precision Group, Inc. today announced that its Vishay Foil Resistors product line (VFR) has introduced the new high-precision Bulk Metal® Foil Burden through-hole resistor. Designed for connection to the secondary-side of current sensing transformers, the device offers low TCR down to ±0.2 ppm/degree C from -55 to +125 degrees C (25 degrees C reference) and excellent load-life stability of

Read more

Arrowhead Thermal Products, Inc. has introduced a new thermally-conductive, electrically-insulative, pressure-sensitive adhesive (TC PSA) called POWERtach™QT. POWERtach QT eliminates the need for mechanical fasteners like clips or screws and all of the processes required to use them. POWERtach QT also replaces the thermally-conductive silicone insulators used to isolate the device from the heat sink. Recommended: Miniature M12 Connector Rated to

Read more

Melexis announces the introduction of the MLX90297, a 600mA single-coil fan driver IC. Aimed at development of energy efficient cooling system designs, this latest device adds to the company’s portfolio of All-in-One single-coil fan drivers, and is a further development of the successful MLX90287 device. It integrates a high sensitivity Hall Effect sensor with two powerful half-bridge output stages. Recommended:

Read more

Keithley Instruments announced today the introduction of the DMM7510 7-1/2-Digit Graphical Sampling Multimeter, the first of a new class of digital multimeters. It integrates a high-accuracy digital multimeter, a digitizer for waveform capture, and a capacitive touchscreen user interface. The DMM7510 is designed to give users confidence in the accuracy of their results, the ability to explore measurements further, and

Read more

ams AG today introduced its AS721x Autonomous Daylighting Manager, the industry’s first integrated chip-scale Internet of Things (IoT)-connected smart lighting manager. This new class of sensor-integrated smart lighting manager solutions delivers cost-effective, IoT-connected integrated control capabilities to luminaire, light engine and replacement lamp manufacturers. Recommended: 400W High-Efficiency Power Supplies with 249 to 528 Vac Input Photopic sensors built with nano-optic

Read more

Powervation Ltd. today announced its latest series of digital dc-dc controllers for servers, high-end desktop, and embedded computing systems. The PV3103, PV3104, and PV3202 devices feature single- and dual-phase outputs and support both PMBus and Intel’s VR12.5 Serial VID (SVID) bus. The flexible, fully-programmable digital controllers provide precision regulation and telemetry to support the latest high efficiency computing system designs.

Read more