Tag: BTS4000

There are two kinds of test operations to test the battery DCIR, one is the pulse DCIR test and another one is the step DCIR test.Pulse DCIR test operationFor pulse test setup, please refer to this article firstly: https://newarebattery.com/pulse-test-on-neware-bts4000-and-igbt/Operation standard of pulse DCIR test: At 0.2C working current the battery works 10s, and at 1C battery works 1s. The following

Read more

Pulse testNecessary Software：(For pulse test, BuildTest software is necessary if you are using BTS7.6.x. But if you are using BTS8.0, then the internal step editor of BTS8.0 can be used to create pulse test directly.) (Suppose we are using 5V6A tester)1. Check the voltage and current range of testerWe must check the voltage and current range of tester before editing

Read more

The sampling frequency of Neware battery tester series can be up to 100Hz or even 1000Hz, which means a huge amount of data could be retrieved in a very short time, this is helpful when customers want to use Neware testers for high C-rate or pulse test. While, for long time cycle life tests, this high-speed sampling frequency might bring

Read more

If you have followed BTS4000 connection tutorial carefully but still failed to make the connection between BTS4000 and your computer. Then the following trouble-shooting might help you. Problem 1: No mid machine controller under 127.0.0.1 If there’s no BTSxx under 127.0.0.1, usually it means the connection between Neware mid machine controller and your pc is not working yet. Then please

Read more

Sometimes a channel already started to test and you want other channels also do the same tests. How to make tha happen easily?In software BTS7.6.x, the steps setting of this channel can be copied into other channels under the same range. The copying method is as follows:1.Select the target channel, right click and choose “Copy Channel”. 2.Click “ Select Chl”

Read more

To set the mapping operation for the middle machine: In the device list, select the middle machine, right-click in the gray area on the right side of the interface, and click “Reset Mapping”. In the mapping interface, click “server IP (e.g. 127.0.0.1)”, “type of middle machine (e.g. BTS82)”, and double-click “number of the middle machine (e.g. 1)”, the right column

Read more

EDLC (Electric Double Layer Capacitors) or super capacitors can be tested by Neware BTS4000, and the clamps are allowed to be customized for testing super capacitors , and the polymer clamps can be used as well. The equation of calculating the super capacitance： Calculating Steps： Firstly, the ultra capacitor voltage’s range should be set in Cycle Layer of Parameter Setting

Read more

Neware BTS4000 series equipment is so stable, reliable with everyone affordable price, many customers even call Neware BTS4000 battery cyclers, though in fact BTS4000 is capable of far more than cycling. If you got a Neware BTS4000 on hand, it’s very possible that you are going to use it mainly for battery cycle-life test, right?Cycle life test is a traditional

Read more

If you have taken your precious time to read what we posted before about the best-selling Neware products, you may find that the top 3 models are all from BTS4000 series, and they all have dual ranges. Why? Neware has several primary series products: BTS3000n, BTS4000, BTS8000, BTS9000, and IGBT7000. BTS is short for Battery Testing System, and IGBT is

Read more

It is unquestionable, that renewable and storage energy industry is growing dramatically during the past decades, therefore, in order to use renewable energy instead of traditional fossil resources, it is essential to deeply understand and working on improve battery’s performance, people realized by analyzing the result of GITT test, as Dee and etc.. Published in 2009, GITT experiments were conducted to determine

Read more