Tag: industry news

8
May

500V Thick-Film Chip Resistors in 0805 and 1206 Sizes

Vishay Intertechnology, Inc. today released a new series of thick-film chip resistors designed to meet the demand for high voltages in industrial and medical applications while saving valuable PCB space. Vishay Draloric RCV e3 devices offer high limiting element voltages of 400V and 500V in the compact 0805 and 1206 case sizes, respectively. Recommended: EPC eGaN Power Transistors Break Silicon

Read more

8
May

VisIC Announces 650V Normally-Off GaN Switch

VisIC Technologies, Ltd. announced their first normally-off GaN power switch. Using VisIC’s gallium nitride power transistors, the ALL-Switch (Advanced Low-Loss Switch) is expected to provide the fastest power-switching devices available amongst all low-resistance switching components. ALL-Switch will be used in a range of customer applications including photovoltaic inverters, UPS, hybrid electric vehicles/electric vehicles and high voltage dc-dc conversion. Recommended: Powerwall

Read more

8
May

Dual Input, 3A Power ORing Smart Switch Saves Space

Micrel, Inc. today introduced the MIC1344, a 3A power ORing smart switch offered in a small 2mm x 2mm QFN package. The MIC1344 targets handheld devices and systems powered from multiple sources such as wall adapters and auxiliary battery power sources. It is also suited for applications that require a diode OR function between two input power sources. The MIC1344

Read more

8
May

600W Quarter Brick targets Telecom, Computing and Servers

Artesyn Embedded Technologies today launched the ADQ600 series, new 600W quarter-brick isolated dc-dc converters with the high efficiency and thermal performance demanded by telecom network and data center equipment. Capable of delivering up to 50 A output current with a single fully-regulated 12 V output, the converters have no minimum load requirement. The ADQ600 series has an input voltage range

Read more

7
May

Socomec and JSR Micro launch Lithium-Ion Capacitor UPS

Socomec and JSR Micro N.V. announce the launch of a lithium-ion capacitor based UPS as a result of a joint collaboration effort. The system is using Socomec’s state of the art UPS equipment in combination with ULTIMO® lithium-ion capacitors, supplied by JM Energy Corporation. The UPS system, supplied by Socomec, has been designed to provide short-term back-up power to critical

Read more

7
May

Protected Low-Side Switches Replace Electromechanical Relays

Supporting the trend from relay to more robust semiconductor solutions, Infineon Technologies AG rolls out its HITFET™+ family of protected low-side switches. The HITFET+ family (High Integrated Temperature protected MOSFET) offers a compelling feature-set with its diagnosis function, digital status feedback and short-circuit robustness, and, not available until today, controlled slew rate adjustment for easily balancing switching losses and EMC

Read more

7
May

Half-Bricks Target Power Amplifier Applications

Murata announces the expansion of the PAH series half-brick dc-dc power converters from Murata Power Solutionswith the addition of the PAH-28/12.5-D24 model. These compact modules measure 2.3″ X 2.4″ X 0.5″ (58 X 61 X 12.7mm) and offer the industry-standard half-brick footprint. The PAH series is designed for power amplifier applications, wireless networks, and telecom applications. The baseplate provides a

Read more

7
May

Extended Trim Range Power Modules

Excelsys Technologies Ltd. has introduced the new family of extended trim range powerMods to complement the existing UltiMod and Xgen platforms. These modules; XgM XgN XgP XgQ are available with nominal output voltages of 5V, 12V, 24V and 48V respectively and each can be dynamically trimmed down to 1V. This feature offers unparalleled flexibility to system designers who need dynamic

Read more

7
May

niversal-Input LED Supplies deliver up to 1400mA

Mean Well Enterprises Co., Ltd. has unveiled the GSC18/25/40 series (18W, 25W, and 40W, respectively) constant current output external LED power supply with built-in power factor correction. For the input side, the IEC320-C8 inlet is adopted for the desktop type (B type), and the 2-pole European plug is exploited for the wall-mounted type (E type). In each case, these power

Read more

7
May

Digitally-Controlled Test Rectifier for Cathodic Protection

Astrodyne TDI has introduced a rugged and portable test rectifier. The Lightweight Test Rectifier (LTR), part of the Defender product line, is designed to test impressed current cathodic protection (ICCP) installation sites. Weighing less than 25 pounds and housed in a durable, compact case, this new unit can easily be carried into the field for testing. Astrodyne TDI’s LTR offers

Read more