Tag: new energy news

27
Aug

Single-Output DIN-Rail Supplies Provide up to 96W

Powersolve announces a new family of 10 to 96W DIN-rail power supplies designed for installation on DIN rail TS35/7.5 or 15. The PDN10, 20, 40, 60 and 100 Series are high-efficiency, high-reliability power supplies that will operate from a universal 88- to 264-Vac input. Recommended: 50-W Explosion-proof Industrial Power Supplies A total of 19 models make up the PDN Series

Read more

21
Aug

DC Electronic Load with Energy Recovery to AC Mains

Intepro Systems introduces the ELR9000 Series of electronic dc loads. A unique feature of the ELR9000 Series is an integral, grid-synchronized inverter designed to return up to 95% of the load test energy back to the grid. The rack-mounted unit is available, off-the shelf, with output ratings of 3.5kW, 7kW and 10.5kW — scalable to 105kW. Recommended: New CEN/CENELEC PLC

Read more

21
Aug

80mm 750W Motors in 24V and 28V Models

Modern drive solutions for automation call for customized motors. Modular systems with configurable modules for customized drive design are the appropriate solution. For years, ebm-papst with its modern ECI motor family has been offering a broad selection of drives, control electronics, gearboxes and brake and sensor modules that can be combined for tailored drive solutions. Now ebm-papst is expanding the

Read more

21
Aug

Dual DC-DC Controller with Digital Power System Management

Linear Technology Corporationannounces the LTC3887-1, a dual output synchronous step-down dc-dc controller with I²C-based PMBus interface for digital power system management. The LTC3887-1 differs from the previously released LTC3887 by providing a three-state pwm signal, enabling the use of DrMOS, power blocks or similar power stages. The LTC3887-1’s enhanced feature set includes a 70ms power-up time and a fast ADC

Read more

21
Aug

High-Throughput Low-Power USB 3.0 Controller

Cypress Semiconductor Corp. today announced a new high-throughput, low-power SuperSpeed USB controller that converts Gigabit Ethernet (GigE) data to USB 3.0 data. The EZ-USB® GX3™ controller targets slimmer laptop designs that include an ultra-thin USB Type-C port and no bulky Ethernet port. GX3 provides comprehensive driver support for all major operating systems, including Windows, Mac OS, Linux, Android and Chrome,

Read more

21
Aug

Multiphase DC-DC Controller with 6-Bit VID

Linear Technology Corporationintroduces the LTC3877, a dual-output multiphase synchronous step-down dc-dc controller with 6-bit voltage identification (VID) control that enables 10mV output voltage step resolution, a necessary feature when powering FPGAs and ASICs with tight input voltage requirements. The LTC3877 operates over an input voltage range of 4.5V to 38V and produces a fixed output voltage from 0.6V to 1.23V

Read more

21
Aug

Ultra-Low-Power MCUs with Segment LCD Controller

AtmelCorporation today announced the company has expanded its family of secure, ARM Cortex M0+-based MCUs with the SAM L22 series. The Atmel SMART SAM L series is the highest scoring product family in the EEMBC ULPBench, the leading independent low-power benchmark. The new devices offer an ultra-low power capacitive touch with a segment LCD controller that can deliver up to

Read more

21
Aug

Wireless Charging now as Fast as Charging by Cable

Toshiba America Electronic Components, Inc. (TAEC) today announced it has launched a new wireless power receiver IC that will enable mobile devices to be charged wirelessly as fast as if they were connected to the charger via a cable. The new TC7764WBG is compliant with Qi™ V.1.1.2, the wireless low power charging standard defined by the Wireless Power Consortium (WPC),

Read more

21
Aug

D-Subminiature Connectors Designed to MIL-DTL-24308

TE Connectivity announces its new AMPLIMITE IP67 D-subminiature connectors meet IP67 performance levels. Designed to meet MIL-DTL-24308 specifications, the new connectors have an environmental sealing that has been successfully tested at a submerged depth of one meter and have water and dust ingress protection to IP67. Recommended: Terminal-Style Connector Minimizes LED Shadowing “We’re continually striving to make connectors that are

Read more

21
Aug

Arc Flash Mitigation System

Many arc flash faults start as single-phase-to-ground faults and then develop into three-phase faults. This is why an early detection of the arc fault and fast fault isolation is needed. When a traditional time characteristic or blocking based coordination principle is used within a relay to mitigate arc flash, it may not be able to trip a breaker quick enough

Read more