BTS-6000 Series Battery Cycler

Energy Regenarative Battery Testing System Designed for Power Cell, Module & Pack

Highlights

High Accuracy

The system provides both voltage and current measurement and control accuracy of ±0.02%, ensuring stable and reliable charge and discharge performance across the full operating range. Accurate control of both voltage and current reduces systematic measurement deviations and improves data repeatability, which is essential for quantitative electrochemical analysis and long-term cycling tests.

High Sampling Rate

With a sampling rate of up to 200 Hz, the system captures transient voltage and current responses during dynamic charge and discharge processes.

This allows more detailed analysis of short-term electrochemical behavior, such as polarization effects and rapid current changes, which may be missed at lower sampling rates.

Discharge Regenerative

The system features a three-level regenerative discharge (archieved by 800 volts DC bus solution only). Discharge energy from active channels can be directly reused by charging channels, while surplus energy from DC modules is redistributed to other modules requiring power.vEnergy can also be transferred between different charging cabinets, and any remaining discharge energy is finally inverted back to the power grid, achieving a discharge energy efficiency of up to 90%.

CAN & RS485 Communication with BMS

Supports CAN bus and RS485 communication with different types of battery packs, enabling reliable data exchange with BMS and external systems. 

By importing DBC files into NEWARE BTS 8.0.0 software, charge and discharge data as well as BMS status information are seamlessly integrated into the BTS interface, allowing intuitive test control and real-time battery status monitoring.

Modular Design

The system adopts a modular design that allows channels and modules to be easily connected in parallel to achieve higher output current, supporting a wide range of testing scenarios and application requirements.

Modular architecture also simplifies maintenance and after-sales service, as faulty modules can be quickly replaced without affecting the entire system. This approach improves service efficiency and enables fast, user-friendly on-site operation.

Scalable System

Featuring a highly scalable architecture, multiple cabinets can be connected in parallel to achieve multi-megawatt output, meeting the demands of high-power battery and system-level testing.

Driving Cycle Simulation

Supports driving cycle simulation testing for battery packs. By loading driving cycle files in Excel or TXT format, the system accurately reproduces real-world operating conditions to verify battery pack performance under actual application scenarios.

The system supports loading up to 1 million rows of driving cycle variation data, meeting the requirements of complex operating conditions and long-duration testing scenarios.

Most Popular Models

CE-6016A-5V60A-H

  • Voltage Range: ±5V
  • Current Range: 60A
  • Voltage & Current Accuracy: ±0.05% F.S.
  • Minimum Discharge Voltage: 1.5V
  • Recording Frequency: 100Hz
  • Sampling Time: 10ms
  • Current Response Time: ≤3ms
  • Off-Line Test: 1GB

CE-6016A-5V100A-H

  • Voltage Range: ±5V
  • Current Range: 75A/100A
  • Voltage & Current Accuracy: ±0.05% F.S.
  • Minimum Discharge Voltage: 1.5V
  • Recording Frequency: 100Hz
  • Sampling Time: 10ms
  • Current Response Time: ≤3ms
  • Off-Line Test: 1GB

CE-6004A-5V300A-HF

  • Voltage Range: ±5V
  • Current Range: 50A/100A/200A/300A
  • Voltage & Current Accuracy: ±0.05% F.S.
  • Minimum Discharge Voltage: -5V
  • Recording Frequency: 100Hz
  • Sampling Time: 10ms
  • Current Response Time: ≤3ms
  • Off-Line Test: 1GB
  • Support Negative Voltage Discharge 

Not sure which product is the best fit? Contact expert for professional solution

Browse by Battery Type

Power Cells

Voltage Range Coverage: 5V~6V

Current Range Coverage: 30A~600A

Module & Pack

Voltage Range Coverage: 30V~1500V

Current Range Coverage: 30A~4000A

Typical Applications

Power Battery Testing

Designed for power battery cell testing under high-current conditions, supporting high-rate charge and discharge performance evaluation and dynamic behavior analysis.

Supercapacitors Testing

Suitable for supercapacitor testing with ultra-low voltage and very high current requirements, enabling accurate characterization of fast charge–discharge behavior and power capability.

Flow Battery Testing

Applied to flow battery single-cell and short-stack testing, providing precise low-voltage, high-current control for polarization analysis and current density evaluation.

Module & Pack Validation

Applied to flow battery single-cell and short-stack testing, providing precise low-voltage, high-current control for polarization analysis and current density evaluation.

EoL

Applied to flow battery single-cell and short-stack testing, providing precise low-voltage, high-current control for polarization analysis and current density evaluation.